Description
Device stages: The first stage (cotton filter): It consists of a cotton candle made of polypropylene that purifies up to 5 microns and removes solid impurities such as sand, mud and algae.
The second stage (solid carbon filter): It is made of solid carbon and its function is to remove dissolved gases and treat water from unwanted substances such as chlorine, taste, smell and color in addition to the smallest impurities up to 1 micron.
The third stage (salt filter): It is a unit known as a membrane. It contains very fine and narrow pores reaching 0.0001 microns and depends on the osmosis property and removing salts, bacteria and heavy metals, starting from 96% as an expulsion rate called mechanical expulsion that does not use any chemicals.
The fourth stage (post carbon filter): A carbon filter made of coconut shells works to remove any taste or smell before the water enters the tank.
| Weights (KG) | Total weight : 17 / net weight : 15.4 |
| Dimensions (CM) | Height: 52 / Width: 29 / Depth: 49 |
| Storage Capacity: |
Cooling capacity per hour: 2 liters Heating capacity per hour: 5 liters |
| Electrical power: |
Cooling 90 Heating 420 Total 510 |
| Energy | 220-240 V |
| Frequency | 50-60 HZ |
Accessories
1-(Source valve
2-( p.e pipes
3-(Drip bowl
4-(Fuse
5-(Catalog)
Instructions
• The cooler should be placed on a flat surface
• Make sure there is water before operating the cooler
• Do not expose the cooler to direct sunlight
• Make sure the cooler is placed in a well-ventilated place for best performance
• If the cooler is not used for a long time, drain the water
After sales
Warranty
Two years on electrical parts
Free Service
5 years free service
Made in China according to Naqi specifications and standards
