Description
Device stages: The first stage (cotton filter): It consists of a cotton candle made of polypropylene that purifies up to 5 microns and works to remove solid impurities such as sand, mud and algae.
The second stage (granular carbon filter): It is made of thermally activated carbon, its function is to remove dissolved gases and treat water from unwanted substances such as chlorine, taste, odor and color.
The third stage (solid carbon filter): It is made of solid carbon with 1 micron pores, its function is to remove the smallest impurities before the water enters the fourth stage.
The fourth stage (salt filter): A unit known as a membrane and contains very fine and narrow pores reaching 0.0001 microns and depends on the reverse osmosis property and the removal of salts and heavy metals, starting from 96% as an expulsion rate called mechanical expulsion that does not use any chemicals.
The fifth stage (TDS Controller): It can be used to control the percentage of salts penetrating from the source.
The sixth stage (Ultrafiltration UF Membrane): It prevents bacteria and heavy metals from entering if the salt valve is opened. Its pore size is 0.025 microns and allows the passage of minerals and salts that are beneficial to the body. (It is excellent for people who want to keep minerals such as calcium, magnesium and salts in their water.))
Stage Seven (UV): An electric filter that focuses ultraviolet rays on the water to kill viruses
Stage Eight (Post Carbon Filter): A carbon filter made of coconut shells that removes any taste or odor after the tank.
| Weights (KG) | Total weight : 11.5 / net weight : 10.7 |
| Dimensions (CM) | Height: 52 / Width: 39 / Depth: 20 |
| Storage Capacity: |
7 liters |
| Electrical power: |
60 W |
| Energy | 220-240 V |
| Frequency | 50-60 HZ |
Accessories
1- 7 liter tank
2- Faucet
3- Pipes
4- Source valve
5- Tank valve
6- Faucet mounting base
7- 2 screws with a screw
8- Catalog
Instructions
• The device should not be exposed to direct sunlight.
• The temperature of the water entering the device should be between 5-38 degrees Celsius
• If the device is not used for a long time, the water source entering the device should be turned off and the tank should be emptied
Note: Filters and membranes are consumables and the time to replace them depends on the type of water entering the device
Made in India
