Description
Device stages: The first stage (cotton filter): It consists of a cotton candle made of polypropylene that purifies up to 5 microns and works to remove solid impurities such as sand, mud and algae.
The second stage (granular carbon filter): It is made of thermally activated carbon, its function is to remove dissolved gases and treat water from unwanted substances such as chlorine, taste, smell and color.
The third stage (solid carbon filter): It is made of solid carbon with 1 micron pores, its function is to remove the smallest impurities before the water enters the fourth stage.
The fourth stage (salt filter): It is a unit known as a membrane. It contains very fine and narrow pores reaching 0.0001 microns and depends on the reverse osmosis property and removing salts, bacteria and heavy metals, starting from 96% as an expulsion rate called mechanical expulsion that does not use any chemicals
The fifth stage (post carbon filter): A carbon filter made of coconut shells works to remove any unpleasant odor or taste after the water is stored in The tank.
| Weights (KG) | Total weight : 21 / net weight : 19 |
| Dimensions (CM) | Height: 76.5 / Width: 42.5 / Depth: 27 |
| Storage Capacity: |
Tank size 40 |
| Electrical power: |
48 W |
| Energy | 220-240 V |
| Frequency | 50-60 HZ |
Accessories
1-(2m long, 3/8″ size)
2-(2-piece 3/8″ OD source valve)
3-(House and membrane filters switch)
4-(faucet)
5-(2 membranes)
6-(40 liter tank)
7-(Tank valve)
8-(Catalog)
Instructions
• The device should not be exposed to direct sunlight.
• The temperature of the water entering the device should be between 5-38 degrees Celsius
• If the device is not used for a long time, the water source entering the device should be turned off and the tank should be emptied
Note: Filters and membranes are consumables and the time to replace them depends on the type of water entering the device
After sales
Warranty
Two years on electrical parts
Free service
5 years free service
Made in China to Naqi specifications and standards
